lmm@magnesiacarbonbricklmm.com

Technical support and construction service team

Main types of steelmaking electric furnace and smelting processes

The broad types of steelmaking electric furnaces include electric arc furnaces, induction furnaces, electric slag furnaces, electron beam furnaces, etc. Common electric furnace steel refers to steel produced by alkaline electric arc furnaces, so this article focuses on electric arc furnaces (EAF). There are two types of electric arc furnaces: direct current electric arc furnaces (DC-EAF) and alternating current electric arc furnaces (AC-EAF). Since DC electric arc furnaces can reduce the amount of refractory materials, are more energy-efficient, have less noise, and halve the flicker, their applications are increasing and developing rapidly. For DC electric arc furnaces, new technologies such as eccentric furnace bottom tapping, water-cooled furnace walls, water-cooled furnace covers, oxygen-burner nozzles, and scrap steel preheating are more suitable and have better effects. The 1990s was a period of rapid development of DC-EAF. In industrialized countries with high scrap steel recycling rates (such as the United States, Japan, and South Korea) and developing countries with insufficient power supply (such as China and Southeast Asian countries), more than 100 electric arc furnaces with a capacity of more than 50 tons were built in a few years. The more representative ones are Japan’s 240t DC-EAF and the United States’ 280t DC-EAF.

A DC electric arc furnace has a graphite electrode on the top of the furnace. The arc is stable and concentrated, with good stirring of the molten pool and uniform temperature distribution in the furnace, and the melting efficiency is improved. The typical feature of a DC electric arc furnace is that the graphite electrode on the top of the furnace is the cathode, and the anode is connected to the bottom of the furnace. This requires that the bottom of the furnace must be conductive. The conductive materials that can be used for the bottom of the furnace are mainly: (1) conductive refractory materials (ABB); (2) metal components: including steel rod electrodes (Irsid-Clecim), steel sheet electrodes (VAI), multiple steel needle electrodes (GHH) and copper-steel composite water-cooled bottom electrodes. Except for the refractory materials used in the bottom of the DC arc furnace, which have special requirements, the refractory materials used in other parts are very similar.

Ultra-high power electric furnace (UHP-EAF) is widely used in AC electric arc furnace (AC-EAF). This type of electric arc furnace has high production efficiency, slow furnace wall loss, shortened melting time, improved thermal efficiency, reduced power consumption, stable arc and other advantages. Therefore, ultra-high power electric furnace has been widely used in the late 1970s. In recent years, UHP technology has developed towards large capacity and high power. The power of some UHP-EAF abroad has reached 1000kVA/t or even higher, which is called ultra-high power electric arc furnace. In order to better play the advantages of UHP, technologies matching ultra-high power have been developed successively, mainly including water-cooled furnace wall, water-cooled furnace cover and long arc foam slag smelting technology. Electric arc furnaces above 30t in Europe are equipped with water-cooled slag furnace wall and water-cooled furnace cover. More than 70% of electric arc furnaces in Japan are equipped with water-cooled furnace wall. Western Europe and the United States have also adopted water-cooled slag furnace wall. The use of water-cooled furnace wall technology can extend the service life of the furnace wall to more than 2,000 furnaces, reduce refractory consumption by more than 60%, increase productivity by 8% to 10%, reduce electrode consumption by 0.5kg/t, and reduce production costs by 5% to 10%. The use of water-cooled furnace cover can extend the service life of the furnace cover to 4,000 times.

Electric furnaces can be divided into trough-type steel-tapping electric arc furnaces and eccentric furnace bottom steel-tapping electric arc furnaces (EBT) according to the type of steel-tapping. The structure is shown in Figure 1. Since the eccentric furnace bottom (EBT) steel-tapping port can expand the water-cooling area, reduce the cost of refractory materials, and reduce the amount of slag unloading in the ladle, its application is gradually increasing.

electric furnace

Electric furnace steelmaking uses scrap steel, metallized pellets, etc. as raw materials, and mainly uses arc heat to smelt scrap steel into new steel through a series of metallurgical chemical reactions under the condition of arc action zone temperature up to 4000℃. The specific process is shown in Figure 2. The smelting process is generally divided into melting period, oxidation period and reduction period. Not only can an oxidizing atmosphere be created in the furnace, but also a reducing atmosphere can be created, so the efficiency of dephosphorization and desulfurization is very high.

My country’s electric furnace steelmaking mainly produces high-quality alloy steel. In recent years, with the continuous changes in electric furnace steelmaking technology, including higher operating temperatures, larger and larger steelmaking furnace capacity, stronger temperature changes, and increasingly improved alloy steel quality, higher requirements have been placed on refractory materials.

LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.

Our Product have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, EZZ steel etc. We do OEM for Concast and Danieli for a long time

Facebook
LinkedIn
Pinterest
Reddit

Comprehensive solution of Refractory for steelmaking

Fill out the form below, and we will be in touch shortly.
Contact Information