product is used in the whole process of steelmaking
Products we offer
LMM TOTAI offer a complete product and service portfolio for all steelmaking processes.
From basic and non-basic bricks and mixes, slide gate plates, isostatic products and prefab components to special machinery, mechanisms and repair systems.
Brand: LMM YOTAI
Warranty: 1 year
Sample: Sample testing is available
Certification: ISO9001/ISO14001
Payment method: TT/LC
Shipping method: sea/land/air
Specifications: Customized products according to customer drawings
Use | Brand | |||
![]() |
![]() |
Sleeve of electrode: | precast block | LY-CFC-18RX |
![]() |
Side wall bricks: | MgO-C bricks | LY-S-NSA-110XMA | |
![]() |
Permanent bricks: | magnesia bricks | LY-HPT-B | |
![]() |
Stamp castables(dry setting): | magnesia-dolomite | LY-S-MD-DV | |
![]() |
Eccentric bottom tap hole | Terminal block:Al2O3-SiC-C bricks | LY-ASG-X | |
Tapping tube: MgO-C bricks | LY-MG-15SX | |||
![]() |
Electrode of furnace bottom: | MgO-C bricks | LY-MG-16BSX | |
![]() |
Gunning repairing material: | magnesia-dolomite materials | LY-G-HD100 |
Eccentric bottom tapping has been applied as a latest technology. High resistances to corrosion, spalling, oxidation are required for refractories for E.B.T. YOTAI provides the best material for each sections.
LY-MG-15CX | LY-MG-15SX | LY-ASG-X | LY-S-MH | |||
![]() |
Tapping tube | Setting brick | Terminal block | Sealing stamp material | ||
Chemical Composition(%) | SiO2 | 76 | 76 | 2 | 5 | |
Al2O3 | 16 | 14 | 70 | 90 | ||
MgO | 10 | |||||
SiC | 12 | |||||
C | ||||||
Apparent Porosity (%) | 5 | 6 | 7 | |||
Bulk Density | 2.92 | 2.9 | 2.9 | |||
Cold Crushing Strength(MPa) | 42 | 40 | 50 | |||
Grain composition(%) | 1.18≦ | 42 | ||||
0.09> | 40 |
Production equipment
Certification
About LMM YOTAI
located at “Magnesium city”of China, we have material location advantage
— Technology
Japanese technology & management
— Equipment
• 1 set 2100 tons automatic hydraulic press
• 2 sets 1850C Tunnel Kiln annual production capacity: 80000 tons
— Experience
we supplied to Greece, Bulgaria, Ukraine, Mexico etc.. we can also do OEM for you
LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.
ARE YOU HAVE A PURCHASING PLAN?– CONTACT US TO GET BEST PLAN!
86 (411)84174804