Products we offer
Al2O3-SiC-C bricks for eaf

Al2O3-SiC-C bricks for EAF bottom tap hole
Use | Brand | |||
![]() |
![]() |
Sleeve of electrode: | precast block | LY-CFC-18RX |
![]() |
Side wall bricks: | MgO-C bricks | LY-S-NSA-110XMA | |
![]() |
Permanent bricks: | magnesia bricks | LY-HPT-B | |
![]() |
Stamp castables(dry setting): | magnesia-dolomite | LY-S-MD-DV | |
![]() |
Eccentric bottom tap hole | Terminal block:Al2O3-SiC-C bricks | LY-ASG-X | |
Tapping tube: MgO-C bricks | LY-MG-15SX | |||
![]() |
Electrode of furnace bottom: | MgO-C bricks | LY-MG-16BSX | |
![]() |
Gunning repairing material: | magnesia-dolomite materials | LY-G-HD100 |
Eccentric bottom tapping has been applied as a latest technology. High resistances to corrosion, spalling, oxidation are required for refractories for E.B.T. YOTAI provides the best material for each sections.
LY-MG-15CX | LY-MG-15SX | LY-ASG-X | LY-S-MH | |||
![]() |
Tapping tube | Setting brick | Terminal block | Sealing stamp material | ||
Chemical Composition(%) | SiO2 | 76 | 76 | 2 | 5 | |
Al2O3 | 16 | 14 | 70 | 90 | ||
MgO | 10 | |||||
SiC | 12 | |||||
C | ||||||
Apparent Porosity (%) | 5 | 6 | 7 | |||
Bulk Density | 2.92 | 2.9 | 2.9 | |||
Cold Crushing Strength(MPa) | 42 | 40 | 50 | |||
Grain composition(%) | 1.18≦ | 42 | ||||
0.09> | 40 |
LMM YOTAI PRODUCT
- Refractory Material for EAF
- Refractory Material for Ladle Furnace
- Refractories for Tundish
- Magnesia bricks for Tundish
- Al2O3-SiC-C block for Tundish
- Magnesia coat for Tundish
- High alumina castable for Tundish
- Slide gate plate for Tundish
- Metering Upper Nozzles for Tundish
- Nozzle for Tundish
- Submerged Entry Nozzle for tundish
- Monolithic Stoppers for Tundish
- SiO2-Al2O3-SiC ramming materials for Tundish
- Refractories for RH degasser
- Refractory Material for EAF
- Refractory Material for Ladle Furnace
- Refractories for Tundish
- Magnesia bricks for Tundish
- Al2O3-SiC-C block for Tundish
- Magnesia coat for Tundish
- High alumina castable for Tundish
- Slide gate plate for Tundish
- Metering Upper Nozzles for Tundish
- Nozzle for Tundish
- Submerged Entry Nozzle for tundish
- Monolithic Stoppers for Tundish
- SiO2-Al2O3-SiC ramming materials for Tundish
- Refractories for RH degasser
LMM TOTAI offer a complete product and service portfolio for all steelmaking processes.
From basic and non-basic bricks and mixes, slide gate plates, isostatic products and prefab components to special machinery, mechanisms and repair systems.
Our Clients Give The Best Feedback



Contact Us
- 86-411 84174804
- lmm@magnesiacarbonbricklmm.com
- Ganjingzi District, Dalian 116000, China
LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.