Products we offer
The company provides a wide range of products and services used in converter, EAF, Ladle, tundish and other kilns and furnaces. We also equipped with world advanced facilities such as Laeis automatic hydraulic press HPF2500, Eirich R19 mixer, Shimadzu made XRF-1800 sequential X-Ray fluores-cence spectrometer, by focusing on product research and development and quality control. Our products also supply to Asia , Europe, America and Africa and other countries and regions.
High-purity, high-density fused magnesia and high-purity graphite are used as the main raw materials, supplemented by special binders and additives, and formed by high-pressure technology. It has the characteristics of high strength, strong slag resistance, strong corrosion resistance and good thermal shock stability.
| Position | MgO% | Al2O3% | CaO% | SiO2% | Fe2O3% | C% | B.Dg/cm3 | AP.Vol% | CCS N/mm2 |
| Porous Plug Brick | 97.5 | 0.1 | 1.9 | 0.4 | 0.1 | 14 | 2.93 | 5 | 40 |
LMM porous plug brick are key components of bottom blowing technology. The following are the characteristics of porous plug bricks:
Porosity: There are many tiny pores or channels inside the air-permeable bricks, which allow gas to pass through under the action of pressure difference.
High temperature resistance: Since breathable brick are usually used in metallurgical processes under high temperature environments, they must have good high temperature resistance.
Wear resistance: During long-term use, breathable brick need to withstand the scouring from gas and the wear of particles, so they must have high wear resistance.
Application scenarios
Bottom blowing technology: breathable brick play a vital role in the bottom blowing technology of ultra-high power electric arc furnaces (UHP EAF). By blowing gas (such as argon, nitrogen, etc.) into the furnace through air-permeable bricks, the molten steel in the furnace can be stirred and refined, and the quality and production efficiency of the molten steel can be improved.
Replacement of top blowing process: The application of air-permeable bricks also replaced the original top blowing process and achieved good results. This change not only simplifies the process flow, but also improves the stability and controllability of the smelting process.

LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.
Trusted by Global Steel Leaders