lmm@magnesiacarbonbricklmm.com

Products we offer

Magnesia carbon bricks for BOF

Magnesia carbon bricks for BOF

Magnesia carbon brick for BOF refer to magnesia – carbon bricks used in Basic Oxygen Furnaces (BOF). Here is a detailed introduction:

1. Composition

Magnesia (MgO): It is the main component, usually accounting for a relatively high proportion. Magnesia has high refractoriness, good resistance to basic slag corrosion, and high – temperature strength. It can withstand the high – temperature environment of the BOF, which generally reaches about 1600 – 1700°C during the steel – making process.
Carbon: Commonly, graphite is used as the carbon source. Carbon can improve the thermal shock resistance of the bricks. Due to its low thermal expansion coefficient and good thermal conductivity, it helps the bricks to resist rapid temperature changes during the charging, blowing, and tapping processes in the BOF without cracking easily.

2. Working Mechanism in BOF

Corrosion Resistance: In the BOF, the molten steel and slag are highly corrosive. The magnesia in the magnesia – carbon bricks can react with the basic components in the slag to form a dense protective layer on the brick surface, which can effectively slow down the further corrosion of the bricks by the slag.
Thermal Shock Resistance: The carbon component in the bricks can absorb and dissipate the thermal stress generated by temperature changes. During the blowing process, oxygen is blown into the furnace to oxidize impurities in the molten iron, and the temperature rises rapidly. After tapping, the temperature drops quickly. The carbon in the magnesia – carbon bricks helps the bricks to maintain their integrity under such rapid temperature fluctuations.

3. Advantages

High Refractoriness: They can withstand the extremely high temperatures in the BOF, ensuring the normal operation of the furnace lining.
Good Corrosion Resistance: Against the basic slag and molten steel in the BOF, which helps to extend the service life of the furnace lining and reduce the frequency of furnace lining repairs.
Excellent Thermal Shock Resistance: Allows the bricks to endure the repeated temperature changes during the steel – making cycle without significant damage, maintaining the structural stability of the furnace lining.

4. Application Positions in BOF

Side Wall: The side wall of the BOF is in direct contact with the molten steel and slag for a long time, and magnesia carbon brick are used here to resist corrosion and mechanical erosion caused by the movement of the molten steel.
Bottom: The furnace bottom needs to support the weight of the molten steel and is also affected by the stirring of the molten steel and the penetration of the slag. Magnesia carbon brick with high strength and good corrosion resistance are essential for the furnace bottom to ensure its safety and service life.

LMM YOTAI PRODUCT

LMM YOTAI offer a complete product and service portfolio for all steelmaking processes.
From basic and non-basic bricks and mixes, slide gate plates, isostatic products and prefab components to special machinery, mechanisms and repair systems.

Brochure Download

Leave your requirements about our refractory mateial. We will reply you within 24 hours :

LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.

Trusted by Global Steel Leaders

Comprehensive solution of Refractory for steelmaking

Fill out the form below, and we will be in touch shortly.
Contact Information