lmm@magnesiacarbonbricklmm.com

Technical support and construction service team

Selection of Long-Life Refractory Materials and Low-Cost Refining Ladle Nozzle Control Technology in Steelmaking Plants

The consumption of refractory materials in the steelmaking process is an important technical and economic indicator for steel enterprises. Researching economic refractory material consumption indicators has significant economic and social benefits for improving steel quality, reducing refractory material consumption per ton of steel, lowering the cost per ton of steel, and achieving green development in the steel industry. Steel Plant, addressing the characteristics of its small-tonnage converters with tight production schedules and diverse types of molten steel containers, applied measures such as converter body economic refractory material control technology, low-cost molten steel refining and ladle nozzle control technology, and economical selection of continuous casting refractory materials based on steel grade to achieve the goal of economical refractory material selection.

Part 1. Problems in Production

The bottom structure of the small-tonnage converters at Steel Plant, after top and bottom blowing modifications, mainly adopts a movable bottom structure, which has many drawbacks. With the addition of bottom blowing, the bottom joint is located in an area severely affected by molten steel erosion, which is detrimental to furnace maintenance. If not properly controlled, a steel penetration accident may occur at the bottom joint. Small-tonnage converters have a longer production process and equipment flow, involving longer transport distances for molten iron and steel, and occupying more high-temperature containers for holding molten iron. Compared to more advanced short-process steelmaking processes, their refractory material consumption per ton of steel is higher.

Part 2. Technical Development Approach:

This involves researching and analyzing the factors affecting the consumption of various refractory materials in the steelmaking process, identifying the key factors influencing consumption and cost, and conducting corresponding mechanism and technical analyses. Measures will be implemented, including economical refractory material control technology for the converter body, low-cost molten steel refining container and ladle nozzle flow control technology, and economical selection of continuous casting refractory materials based on steel grade, to achieve the goal of economical selection and rational use of refractory materials in the steelmaking process.

Part 3. Economic Refractory Material Control Technology for Converter Body

The converter lining structure was modified, and refractory materials for furnace repair and protection were selected to meet the needs of bottom blowing modification. The converter lining structure was redesigned, prioritizing the inverted teapot-shaped furnace bottom construction method, embedded lining construction, and an integrated design for the taphole brickwork to improve the service life of weak parts of the lining. Long-life and large-area repair materials were selected to improve converter production efficiency.

① Embedded Furnace Bottom Structure To ensure the safety of the joints, an “embedded furnace bottom” structure was designed and developed, lowering the furnace bottom joint by 300mm and changing the horizontal joint to a combination of horizontal and vertical joints. The design is shown in Figure 1.

② Construction Scheme for Bottom-blown Furnace Bottom and Lower Furnace Body

During the construction of the furnace bottom, first fix the bottom-blown seat bricks, then lay a permanent layer of 65mm magnesia bricks at the bottom, followed by a 100mm magnesia-carbon brick layer, and finally lay the upper bottom-blown seat bricks. In the circular area with a diameter of 2040mm shown in Figure 2, lay 550mm long magnesia-carbon bricks vertically. From the 2040mm diameter area to the outer edge of the furnace bottom, lay 200mm long magnesia-carbon bricks vertically. The height of this brickwork should be 20mm higher than the furnace bottom flange. Build 650mm long magnesia-carbon bricks around the bottom-blown upper protective bricks for protection. The total height of the brickwork should be 100mm higher than the furnace bottom construction plane.

③ Improved Design of the Large Brick for the Steel Outlet

A mating joint was added to the outside of the base brick to ensure a tighter fit between the base brick and the sleeve brick.

The large base brick for the steel outlet is composed of four pieces, each independently machine-pressed, resulting in higher compressive strength compared to cast base bricks. The four base bricks are then firmly bonded together.

The structural comparison of the large brick before and after the improvement is shown in Figures 3 and 4.

The original cast-in-place cylindrical taphole sleeve bricks were replaced with segmented, multi-faceted, machine-pressed magnesia-carbon bricks, improving the compressive strength, density, and corrosion resistance of the taphole sleeve brick structure. The improved multi-faceted taphole sleeve bricks can be fixed to the taphole flange, resulting in a more stable structure and preventing loosening during taphole replacement drilling.

④ Magnesia spraying material quality requirements: The spraying material should have a reasonable particle size distribution (0-3mm), stable quality, and be easy to use. Magnesia spraying material service life requirements: Service life ≥ 48 hours, synchronized with the life of the furnace bricks.

Part 4. Low-Cost Steel Refining Container and Ladle Nozzle Flow Control Technology

① Optimize Ladle Lining Refractories Material

Optimize the ladle refractory formulation (see Table 1) to improve ladle service life, adapt to the needs of high-efficiency and fast-paced converter production and reduced tapping temperature, and economically select the ladle sliding nozzle refractory material integral structure to meet the requirements of ladle steel flow control and subsequent protective casting, thus achieving low-cost steel refining container and ladle nozzle flow control.

High-alumina bauxitemagnesia powderspinel powdersilica fume calcium aluminate cement explosion-proof fibersodium tripolyphosphate
75125880.51

Steel ladle castables possess excellent properties, but they are highly susceptible to slag erosion and molten steel washout during use. Starting with the erosion of the castable matrix, slag penetrates along cracks into the castable interior, accelerating the erosion rate and reducing the ladle lining’s service life.

During on-site ladle bottom packing, 50 kg of 30-40 mm high-alumina bauxite particles are added to a batch of castable to enhance the ladle bottom’s resistance to erosion by the molten steel.

Adding four regenerative baking stations extends the ladle baking and sintering time, improving the ladle’s service life.

② Carefully Selected Ladle Nozzle Flow Control: The ladle sliding mechanism, a key component directly used in steelmaking plants to control molten steel flow and facilitate automated casting, significantly impacts not only the cost per ton of steel but also ladle turnover, production scheduling, continuous casting, and the labor intensity of operators.

Part 5. Economical Selection of Refractory Materials for Continuous Casting by Steel Grade

Long-life tundishes, slide block flow control tundishes, and high-life stopper rod tundishes are selected according to steel grade, and different grades of long nozzles and immersion nozzles are economically selected to meet the needs of molten steel protection during casting.

The service life of the tundish is a crucial indicator of the continuous casting system. Since 2012, Laiwu Steel Plant has been working to improve tundish lifespan. Several key factors limiting tundish lifespan were analyzed: low nozzle lifespan, high probability of tundish penetration in the impact zone, and poor erosion and corrosion resistance of the working lining. Efforts were made to address these key issues and improve tundish lifespan.

The selection of functional refractory materials for the flow stabilizer in continuous casting plays a vital role in reducing refractory erosion in the impact zone and improving tundish lifespan. Therefore, the composition of the flow stabilizer refractory material was adjusted and optimized, different flow stabilizers were designed, the baking process was improved, and strict operating procedures were stipulated, thereby improving the flow stabilizer’s erosion resistance.

Part 6. Economic Selection of Materials for Blast Furnace Lining and Ladle Lining

Blast furnaces and ladles used for tapping molten iron have been phased out in short-process metallurgical layouts, but they still play a crucial role in steel plant expansion and renovation, storing molten iron and ensuring uniform composition and temperature. Because materials are flexibly selected based on the usage conditions of different parts during the integral casting of the blast furnace, the furnace exhibits good integrity, shorter construction time, and lower operating costs. Combined with blast furnace jacket repair technology, integral taphole replacement technology, and slag adjustment and furnace protection technology, its service life can reach over 32 months, and the single-furnace molten iron throughput can exceed 4 million tons. Furthermore, the optimal choice of clay working layer and high-alumina permanent layer molten iron ladle can well meet the requirements for holding molten iron. The application of online repair technology and offline minor repair technology further extends the service life of the molten iron ladle, achieving a stable service life of over 1000 cycles.

Part 7. Conclusion

Through research and analysis of the factors affecting the consumption of various refractory materials in the steelmaking process, this study identified the key factors influencing consumption and cost, and conducted corresponding mechanism and technical analyses. By applying measures such as economical refractory material control technology for converter body, low-cost molten steel refining loading and ladle nozzle flow control technology, and economical selection of continuous casting refractory materials according to steel grade, the goal of economical and rational use of refractory materials in the steelmaking process was achieved, resulting in good effects on controlling refractory material consumption and costs.

LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.

Our Product have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, EZZ steel etc. We do OEM for Concast and Danieli for a long time

Facebook
LinkedIn
Pinterest
Reddit

Comprehensive solution of Refractory for steelmaking

Fill out the form below, and we will be in touch shortly.
Contact Information