lmm@magnesiacarbonbricklmm.com

Technical support and construction service team

What is the difference between DC furnace and AC furnace in steelmaking process?

During the smelting process of DC furnace, the magnetic field force generated by the power supply has a stronger stirring ability for the molten pool than that of AC furnace. The decarburization, dephosphorization and degassing reactions of DC furnace are faster than those of AC furnace, which is more conducive to operation. The magnetic field stirring effect of DC furnace is equivalent to the effect of electric furnace with bottom blowing technology.

Due to the desulfurization reaction mainly takes place in the reduction period. The alkalinity of electric furnace smelting is generally controlled between 2.0 and 2.5, and the alkalinity in actual operation is between 1.8 and 2.5. The amount of desulfurization during the oxidation period of the electric furnace is very small, not exceeding 20%, so there is not much difference between the two in the desulfurization reaction.

In some special cases, the deleading and dezincification operations are faster and more effective than those of AC furnaces.

The comparison of electrochemical reactions between DC furnace and AC furnace is not much different.

There is no arc deviation phenomenon in AC furnace, the arc length is shorter than that of DC furnace, and the difficulty of controlling foam slag in DC furnace is lower than that of AC furnace.

In the smelting process, the DC furnace has higher requirements for the amount of steel left after steel tapping and the conductivity of scrap steel, otherwise the bottom electrode will not be conductive, so the vertical current furnace has higher requirements for scrap steel. The AC furnace has lower requirements for scrap steel than the DC furnace, and after the bottom electrode is not conductive, the molten pool needs to be treated for a long time under high temperature conditions. Generally speaking, the accident rate of the DC furnace is higher than that of the AC furnace.

The arrangement of the polar center circle of the AC furnace makes the cold zone of the AC furnace relatively small. On the contrary, the cold zone of the DC furnace is more than that of the AC furnace, and it is easy to have EBT cold zone. The scrap steel in the cold zone of the furnace wall is bonded in large quantities, and phenomena such as abnormal steel tapping composition and unstable steel tapping volume occur, causing the ladle slag line to move down, reducing the service life of the ladle, etc.

The characteristics of the bottom electrode of the DC furnaces limit the tapping temperature of the DC furnaces, which is generally less than 1630℃, so it is not conducive to the dynamic adjustment of temperature in production. There are limitations in deoxidation, removal of inclusions, and desulfurization during the steel tapping process. In this regard, AC furnaces have wider temperature requirements, which is more conducive to dynamic control of production and strengthening of metallurgical reactions in the steelmaking process.

LMM YOTAI established in 2007. Our production technology comes from Japanese Yotai. As an experienced and international player in the refractories industry. We have succeeded in expanding both the breadth of its product range and the depth of its services. From raw material selection, refractory portofio & optimization, installation & services & recycle of used refractories on site to further reduce client’s Opex & Capex in refractory consumption per ton steel output, meanwhile improve product quality of client.

Our Product have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, EZZ steel etc. We do OEM for Concast and Danieli for a long time

Facebook
LinkedIn
Pinterest
Reddit

Comprehensive solution of Refractory for steelmaking

Fill out the form below, and we will be in touch shortly.
Contact Information